DP29-40 Landtek

Applications DP29 is a multifunctional, portable dew point humidity meter, especially designed for field use. Typically apply to dew point measurement of SF6gas. Based on the principle of chilled mirror. * Accurate measurement is guaranteed. * The system is stable, No need to repeatedly calibrated. * A built in electronic sample gas flow monitor. * Use RS-232 data output to connect with PC. Introduction l DP29-40 is specifically designed for air dew point measurement. It is applicable to standard reference for electronic component durability, dew point control for firing furnaces, dew point control for fuel cell test system, etc.

l DP29-SF6 is specially for the measurement of Sulfur Hexafluoride (SF6). l DP29-60 is a standard type. It applies to standard reference for laboratory calibration, moisture control for ceramic firing furnaces, humidity control for thermo-hygrostat chamber. l DP29-70 is a high-end type. It is suitable for moisture control of drying process, production process fo lithium ion battery, measurement of gas with low dew point.
Specifications Range Under 0°C: -40°C
Under 10°C: -40°C
Under 20°C: -35°C
Under 35°C: -30°C
Accuracy: =± 0.2 °C, ±1Digit
Repeatability: =± 0.1 °C, ±1Digit
Resolution: 0.1 °C
Default Output: USB
Optional Output: ±10mv/°C (0°C= 0mv) or 4-20mA
Measurement Principle: Chilled
Mirror Refrigeration: Semiconductor Refrigeration
Inlet Flow: 15~60L/h, Generally 30~40L/h
Inlet Pressure: 10mbar~10bar (1kpa~1Mpa)
Response Time: 2°C/Second (Maximum)
Pump: Optional Accessory
Mirror Check: Press the Mode Conversion Key to mirror check mode (‘CH' on the display), and check manually
Instrument Check: Press the Test Cooling Key, open the measurement probe, and check manually at mirror check mode.
Voltage: 220VAC±10%, 50/60HZ
Consumption: About 160
Watts Temperature: 0~50°C
Humidity: <90%, No Condensation Weight: About 7.22kg Dimension:342(W)x140(H)x326(D) mm Accessories Standard Accessories:
1. Main Unit
2. Inlet Tube (FEP, 3m), With Connector
3. Instruction Manual