Pre Orders
Pre-Order
Model: Insulation Multimeter
Key featuresInsulation test voltages 500 V, 1000 VInsulation test: 0.1 MΩ to 600 MΩAuto discharge of capacitive voltageAC/DC VoltageDC millivoltsAC/DC milliampsResistance (0.1 Ω to 50 MΩ)ContinuityThree-year warrantyRemote probe, test leads, alligator clipsRugged, utility hard caseAuto power off to ..
210,000
Pre-Order
Model: Basic Earth Ground Tester
Overview:The Fluke 1621 Kit is an easy-to-use earth ground tester.
For ground resistance testing, the 1621 Kit is the first line of defense in
detecting reliable ground connections. The unit features basic ground testing
methods including 3-pole Fall-of-Potential as well as 2-pole ground resistan..
Model: True RMS AC/DC Clamp Meter
Product overview: Fluke 374 True RMS AC/DC Clamp MeterBe ready for anythingThe Fluke 374 True RMS Clamp Meter can read up to 600 V and 600 A in both AC and DC modes. Additionally, the 374 is compatible with the new iFlex flexible current probe (sold separately), which increases the measurement range..
83,000
Pre-Order
Model: 35V/6A Adjustable DC Power Supply
Four digit display voltage and current, resolution up to 10mV/1mA;Standard USB quick charging function, 5-12V output, supporting a variety of quick charging protocols;10 groups of data storage/retrieval functions;AC input voltage 230/115V switch, universal;Fully isolated serial port, software suppor..
32,000
Pre-Order
Model: 35V/6A Adjustable DC Power Supply
Four digit display voltage and current, resolution up to 10mV/1mA;Standard USB quick charging function, 5-12V output, supporting a variety of quick charging protocols;10 groups of data storage/retrieval functions;AC input voltage 230/115V switch, universal;Fully isolated serial port, software suppor..
25,000
Pre-Order
Model: 35V/6A Adjustable DC Power Supply
Fully isolated serial port, software support multiple power supply control, easy to set up measurement and control or aging system;; Over voltage, over currentFour digit display voltage and current, resolution up to 10mV/1mA;Standard USB quick charging function, 5-12V output, supporting a variety of..
27,500
Model: Shore Hardness Tester
Overview:
Used to determine the indentation hardness of materials
ranging from cellular products to rigid plastics.
Features:* It meets standards of DIN 53505, ISO 868, ISO 7619, ASTMD
2240, JISK7215.
* With average calculate function.
* Peak value deposit function.
* Under-..
47,000
Pre-Order
Model: Memory Foam Hardness Tester
Features* It meets standards of DIN 53505, ISO 868, ISO 7619, ASTMD 2240, JISK7215.* With average calculate function.* Peak value deposit function.* Under-voltage alarm function.* Use USB data output to connect with PC.* Provide Bluetooth data output choice. ParametersTested Result/Mean Value/Max.Va..
Model: Pencil Hardness Tester
Overview:Coating hardness is
the neccessary measurement for the performance of coatings.This instrument
applied the Pencil Scratch Method.It is a fast and economical way to determine
the film hardness using thickness. Principle:The instrument applies mechanical measurement.Keep three
point ..
36,500
Pre-Order
Model: Textile Hardness Tester Ball 2.5mmΦ
To measure the winding density (hardness) of textile
bobbins, beams, spools, cones, dye packages etc.
* Convertible probe, the curved end of the probe is used
for the bobbin with a diameter less than or equal to
400mm, and the flat end of the probe is suitable for the
bobbin with a diameter ..
47,000
Pre-Order
Model: Textile Hardness Tester Ball 5mmΦ
To measure the winding density (hardness) of textile bobbins, beams, spools, cones, dye packages etc. * Convertible probe, the curved end of the probe is used for the bobbin with a diameter less than or equal to 400mm, and the flat end of the probe is suitable for the bobbin with a diameter greater ..
47,000
Pre-Order
Model: Automatic Precision Micro Hardness Tester
Mitech JMHVS-1-XYZ automatic precision micro hardness tester,based on the mechanical principle of the positive quadrilateral pyramid diamond indenter into the sample surface to produce indentation.By measuring the diagonal length of the indentation to achieve the hardness of the material.I..
5,500,000
