Main Menu / Categories
Your Cart

OCB20 Amsamotion

OCB20 Amsamotion
  • Stock: In Stock
  • Model: USB To MPI/DP Adapter for Siements S7-200/300/400
9,000
+ 350 Shipping charges

Specification:

-Model: 972-OCB20-0XA0 (8th generations)

-Standard: USB Adapter for PC, support PPI/MPI/DP communication

-Suitable for:  support S7-200/300/400 series SIEMENS PLC

-Support: XP, VISTA, Win7 32/64bit

-With Communication indicator

-Cable length: 4 meters 

Features:

1. The signal part by the high-speed optical coupling isolation is same with the original.

2. Support for MPI and DP multi-master communication.

3. Automatically adapt to the communication rate has 9600,19200,187.5K, 500K, 1.5M

4. Support 200PLC and ET200 communications, and PPI multi-master communication.

5. Support 840D CNC system programming.

6. Install the original driver, without generating serial port, direct to select USB

7. Support WIN7 64-bit systems, support V5.5 software (no need to install the drive in V5.5)

8. In the shell,there are soft rubber protection, anti-pressure, anti-drop.

9. With the PTC resettable fuse, in the condition of overvoltage, overcurrent, short circuit can good protect  the internal circuitry.

 

S7-200 / 300/400 series PLC programming adapter cable length of about 4 meters, with

communication indicator, direct to use the USB interface of STEP7 software, support for

PPI / MPI / DP communication,can replace the original Siemens products: 972-0CB20 -0XA0.

MPI master automatically adapt to the communication rate has 9600,19.2Kbps and 187.5Kbps,

500K, 1.5mkbps DP master communication. With the driver CD, install the original drivers, no

need to generate serial port, just to s elect the USB in software.

Driver instal problem:

If you have encountered during installation unlimited require a reboot, go to the registry

HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Session Manage position delete

PendingFileRenameOperations

 

Please note: If you are using a win7 system, programming software is STEP7 V5.5 SP2 , please use  the

PC_Adapter_USB \ Drivers \ s7oupc2x.sys  (in PC adapter USB V2.0 or V1.2 disk drive) file overwrites 

C: \ Windows \ system32 \ drivers \ s7oupc2x.sys

Special Note: The PLC software does not support the above systems, customers will need to

consult their own manufacturers of PLC. While cable can be installed above the system drive, it

does not mean that the cable can be used, because if the PLC software does not support the above

system, it still does not work, this is the important.

Package including:

-972-OCB20-0XA0 cable  1pcs

-CD driver  1pcs

-Box   1pcs