Small form factor available in steady-state DC ion emission blowers
24 VDC or 24 VAC input
Facility Monitoring System (FMS) interface
Operational failure alarm
U-bracket mounting
Auto-Clean System

Enhanced Capabilities:
An alarm LED on the front of the blower indicates a high voltage circuitry failure and a five-pin facility monitoring system (FMS) interface is accessible on the rear of the blower. The FMS interface provides a 4-20 mA current loop and relay output connection. Together with the 24 VDC input connection, the FMS output is situated on a convenient terminal block, designed for easy integration with your process equipment.

Power Options :
The Model 6422e blower may be powered by 24 VAC or 24 VDC, from power supplies or directly from process equipment to fit your application. For 100-120 VAC input power, use #14-1320-01, for 230 VAC use #14-1330, and for applications where DC input power is preferred, use #14-1322 (performance may be reduced with DC power).


Input Voltage

24 VDC (±10%), 6W max or 24 VAC (±10%), 50-60 Hz, 6W max

Output Voltage

5-6 kV at emitter points



±1000-100V, <4 sec @ 1’1 with either 24 VAC or 24 VDC


±20V @ 1’ away

Ion Emission

Steady-state DC

Emitter Points

Tungsten wire; internally shielded


23 cfm (typ)


Cleanroom Class

Meets ISO 14644-1 Class 5 (Fed Std. 209E Class 100)


Operating Temp

Temperature 50-95°F (10-35°C); humidity 20-60% RH, non-condensing


<0.004 ppm (typ)

LED Indicators

Green POWER; red ALARM


U-bracket, factory installed



With bracket: 4.95H x 4.10W x 2.48D in. (125H x 104W x 63D mm); without bracket: 4.36H x 3.26W x 2.48D in. (111H x 83W x 63D mm)


With bracket 12.7 oz (357g); without bracket 11.2 oz (314g)


Free Shipping

This product qualifies for free air shipping.

  • Views: 955
  • Product: Ionizing Blower
  • Availability: In Stock
  • Rs 4,500

Tags: 6422e, simco, power, tools