UT219DS UNI-T

Specification:
AC Current (A): 60.00A～600.0A; ±(1.8%+6)
Surge Current (A): 60.00A～600.0A; ±10%
DC Current (A): 60.00A～600.0A; ±(1.8%+6)
AC combined DC（AC+DC）Current(A): 60.00A～600.0A; ±(3.0%+6)
AC Voltage (V): 6.000V～600.0V; ±(1.0%+6)
LoZ ACV: 600.0V; ±(2.5%+6)
DC Voltage (V): 6.000V～600.0V; ±(0.6%+3)
AC combined DC（AC+DC）Voltage(V): 6.000V～600.0V; ±(2.0%+6)
DC Current: 2000; ±(0.9%+6)
AC Current: 2000; ±(1.5%+6)
Resistance (Ω): 600.0Ω～60.00MΩ; ±(1.0%+3)
Capacitance CAP: 60.00nF～60.00mF; ±(4.0%+7)
Frequency: 60.00Hz～40.00MHz; ±(0.1%+6)
Duty Cycle: 0.1%～99.9%; ±(2.6%+7)
Temperature ℃: -40～1000℃; ±(2.0%+5℃)
Temperature ℉: -40～1832℉; ±(2.0%+9℉)
Special Function; Digits: 6000; Automatic/Manual range
Opening Size of Tongs Head: 33mm; True RMS
AC Current Frequency Response: 40Hz∽400Hz
AC Voltage Frequency Response: 40Hz∽1kHz
Motor Phase Sequence Measurement: 600.0V
Low Pass Filter Test; (1kHz 3db Attenuation); Diode Testing: 3V
Measure Digital Conversion Rate: Times/s 5 times
Measure Analog Bar Conversion Rate: Times/s 20 times
Analogue Bar Graph: 31
LCD Display（HTN）:Interface Double Display
Auto Power -Off; Low voltage display; Data Hold (H)); Relative Value (REL); Maximum/Minimum (MIN); Voltage + Current Double Display(V+A); Function Selection(SELECT); Automatic backlight; Drop Test 2m; Protection Grade IP54
Input Impedance ≥10MΩ
General Characteristics
Battery: 3 x AAA 1.5V Alkaline Battery (not included）
LCD Size: 35x31mm/1.4x1.2in

Package List:
1 x Clamp Meter
1 Pair Test Leads
1 x Instruction
1 x Bag
1 x Thermocouple