The reliable, repeatable, accurate way to check bearings and machine health

Make go or no-go maintenance decisions with confidence. The Fluke 805 FC Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration, bearing health and machine health.

Manage and monitor workflow for better maintenance results

Using the Fluke Connect Mobile App it’s now easier than ever to manage your vibration screening workflow. Integrated machine profile functionality allows you to setup machine profiles using the app and then push them directly to your 805 FC Vibration Meter. Users can then use the list of machine profiles to create work orders, and develop route based maintenance schedules which can be dynamically sent to technicians in field, helping to ensure the proper focus on critical assets. Once a machine is tested, the 805 FC communicates the results directly to the app and associates them with the proper profile and route. This data can easily be shared between teams, so you can make better maintenance decisions.

Other useful features:

• Reliable, repeatable, accurate device for checking bearings and overall vibration
• Features innovative sensor design that minimizes measurement variations caused by device angle or contact pressure
• Provides consistent data quality at both low and high frequency ranges
• Offers four-level severity scale to assess urgency of problems and bearing condition
• Allows you to export data via USB or wirelessly, through the Fluke Connect® mobile app
• Compatible with Fluke Connect® Mobile App that can transmit measurements to your smartphone to be shared in real time
• Enables you to get authorization to take next steps in an instant if machine health is at risk via Fluke Connect™ mobile app*
• Allows you to view trending in Microsoft® Excel using pre-built templates
• Measures overall vibration (10 Hz to 1,000 Hz) for acceleration, velocity, and displacement units of measurement for a wide variety of machines
• Provides Crest Factor+ technology for reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
• Compares vibration levels with ISO-10816 severity scales and stores results to the Fluke Connect Cloud
• Features colored lighting system (green, red) and on-screen comments to indicate how much pressure needs to be applied to take measurements
• Measures temperature with Spot IR Sensor to increase diagnostic capabilities
• Holds and saves up to 3,500 measurements in on-board memory
• External accelerometer (optional) support for hard to reach locations
• Features built-in flashlight for viewing measurement locations in dark areas
• Provides large high-resolution display for easy navigation and viewing
  
  

  Specifications: Fluke 805 FC Vibration Meter

  Specifications
  Low frequency range (overall measurement)	10 Hz to 1,000 Hz
  High frequency range (CF+ measurement)	4,000 Hz to 20,000 Hz
  Severity levels	Good, satisfactory, unsatisfactory, unacceptable
  Vibration limit	50 g peak (100 g peak-peak)
  A/D converter	16-bit
  Signal to noise ratio	80 dB
  Sampling rate	Low frequency: 20,000 Hz High frequency: 80,000 Hz
  Real time clock backup	Coin battery
  Sensor
  Sensitivity	100 mV g ± 10%
  Measurement range	0.01 g to 50 g
  Low frequency range (overall measurement)	10 Hz to 1,000 Hz
  High frequency range	4,000 Hz to 20,000 Hz
  Resolution	0.01 g
  Accuracy	At 100 Hz ± 5% of measured value
  Amplitude Units
  Acceleration	g, m/sec²
  Velocity	in/sec, mm/sec
  Displacement	mils, mm
  Infrared Thermometer (Temperature Measurement)
  Range	-20 °C to 200 °C (-4 °F to 392 °F)
  Accuracy	±2 °C (4 °F)
  Focal length	Fixed, at ~3.8 cm (1.5")
  External Sensor
  Note: Fluke supports but does not provide external sensors
  Frequency range	10 Hz to 1,000 Hz
  Bias voltage (to supply power)	20 V dc to 22 V dc
  Bias current (to supply power)	Maximum 5 mA
  Firmware
  External interfaces	USB 2.0 (full speed) communication
  Data capacity	Database on internal flash memory
  Upgrade	Through USB
  Memory	Up to 3,500 measurements
  Radiated Emission
  Electrostatic discharge: burst	Standard EN 61000-4-2
  Electromagnetic interference	Standard EN 61000-4-3
  RE	Standard CISPR 11, Class A
  Environmental
  Operating temperature	-20 °C to 50 °C (-4 °F to 122 °F)
  Storage temperature	-30 °C to 80 °C (-22 °F to 176 °F)
  Operating humidity	10% to 95% RH (non-condensing)
  Operating/storage altitude	Sea level to 3,048 meters (10,000 feet)
  IP rating	IP54
  Vibration limit	500g peak
  Drop test	1 meter
  General Specifications
  Battery type	AA (2) Lithium Iron Disulfide
  Battery life	250 measurements
  Size (L x W x H)	24.1 cm x 7.1 cm x 5.8 cm (9.5 in x 2.8 in x 2.3 in)
  Weight	0.40 kg (0.89 lb)
  Connectors	USB mini-B 7-pin, external sensor jack (SMB connector)