HT6510NT Landtek
| It can accurately measure and record hardness of various things (e.g., the hardness of coatings, plastics, wood, or metal materials). |
Features
* The measured surface can be flat or curved.
* Not limited by area size.
* Easy to operate, stable performance.
* Easy to carry and other characteristics.
Principle
The spring compression deformation, the force generated by the load on a known diameter of the test head, with the test head to mark the coating surface to be tested to check whether the coating surface is damaged, the test results in Newton.
Specifications
HT6510NT Landtek
3M Test Clip
Overview:The 923650-16 is a surface-mount Test Clip with headless head. This series provides downsi..
Rs 4,000
PREORDER
CM8000 Landtek
Overview: Used for checking the thickness coating of wet paint, enamel lacquer,adhensiv..
Rs 6,000
HT6510P Landtek
Overview:Coating hardness is the neccessary measurement for the performance of coatings.This instru..
Rs 36,500
SRT6223 Landtek
Introduction:This Digital Surface Profile Gauge is a handheld gauge for fast and accurate measuremen..
Rs 72,000
PREORDER
HT6510T 2.5 Landtek
To measure the winding density (hardness) of textile bobbins, beams, spools, cones, dye packages et..
Rs 47,000
PREORDER
HT6510T-5 Landtek
To measure the winding density (hardness) of textile bobbins, beams, spools, cones, dye packages etc..
Rs 47,000
PREORDER
HT6510T-10 Landtek
To measure the winding density (hardness) of textile bobbins, beams, spools, cones, dye packages etc..
Rs 47,000