DO-510 Well Knit

DO-510 Portable Water quality Tester LCD Display DO Dissolved Oxygen Meter 

Product Description:

1. Thank you for purchasing the DO-510 Dissolved Oxygen meter.
2. This economy microprocessor-based palm-top meter has a large custom LCD(Liquid Crystal Display)for clear and easy reading.
3. The DO-510 offers the measurement of dissolved oxygen in the percentage saturation mode and in the concentration mode.
4. The meter ensures accurate measurement of the Dissolved Oxygen values through its temperature compensation features.
5. Please read this manual thoroughly before operating your meter.

To take measurements:

1. Remove the protective cap of electrode.
2. Rinse the probe well with de-ionized(DI) water or rinse solution.
3. Select the appropriate measurement mode.Press the [100%/mg] or [0%/mg] Key to toggle between Percentage Saturation(%) measurement mode and Concentration(mg/L)measurement mode.
4. Dip the probe into the sample.Stir the solution gently to homogenize the sample.Make sure that the sample is continuously flowing past the membrane sensor.
5. Take your measurements once your meter reading has stabilized.(It is about ten minute)
6. Note: Always replace the protective cap after use.

Technical Specification: