UTD2102E UNI-T

Descriptions:

UNI-T UTD2102e Digital Oscilloscope with large 7" display and 100MHz bandwidth, 32K record length for 2 channel with highest 500Ms/s sample rate. It is a widely used electronic measuring instrument, can transform the electrical signals into visible images, so that people can study the changes of various electrical phenomena.

Features:

Wide and Sensitive Scopemeter --- 100MHz bandwidths; 500Ms/S Real Time sample rate; Dual analog channels wide vertical range 1mV/div~20V/div.

Fast Convenience Capture Digital --- With copy function for fast storage infomation; Record length up to 32K, and waveform record up to 1000 screen.

Reliable Electronic Measuring Tool --- High accuracy and wide measurement range meet different analyze demands.

Easy to Use --- Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device. Multilingual menu available, with multiple functional button for fast operation.

Large Display More Easy Reading --- 7 inch large TFT LCD display with 800×480 pixels RGB, large and vivid more, make monitor and analyze work more easy.

Wide Application --- electronic circuit debugging / circuit testing / design and manufacture / education and training / automobile maintenance and testing.

Specifications:

Model		UTD2012e
Channel		2
Bandwidth		100MHz
Acquisition modes
Real Time sample rate		500MS/s
Equivalent sampling		50GS/s
Average		2 channels simultaneously, can counter the average of 2 n times.and n=1~8 positive integers can be selected.
Input
Input Coupling		DC, AC, and GND
Input Impedance		1ΜΩ±2%, in parallel with 20pF±3pF
Probe Attenuation Factor		1×,10×,100×,1000×
Max. Input Voltage		400V(DC+ACpeak,1ΜΩinput resistance)(10:1 probe attenuation)
Channel Isolation		Over 40:1
Channel Time Delay(typical)		150ps
Horizontal
Interpolation		sin (x) / x
Memory Depth		32K
Horizontal Scale (s/div)		2ns/div ~ 50s/div, step by 1-2-5
Sampling Rate / Relay Time Accuracy		±50ppm(any≥1ms time interval)
Horizontal Display		12div
Interval (△T)		Single:± (1 interval time + 50ppm × reading + 0.6ns)
Accuracy (full bandwidth)		average≥16 : ±(1 interval time + 50ppm × reading + 0.4ns)
Vertical
Vertical Resolution(A/D)		8 bits (2 channels simultaneously)
Horizontal Sensitively Range(V/div)		1mV/div -20V/div(in BNC)
Displacement Range		±10div
Vertical Bandwith		100MHz
Low frequency response (AC coupling, -3dB)		≤5Hz( over BNC)
Rais Time (BNC typical)		≤3.5ns
DC Gain Accuracy		As Vertical sensitivity is 1mV~5mV/div:±4% (acquisition or average value acquisition modes);

		As Vertical sensitivity is 10mV/div~20V/div:±3% (acquisition or average value acquisition modes);

DC Measurement Accuracy(average value acquisition modes)		Vertical displacement = 0 , and N≥16: ±(5%×reading + 0.1div + 1mV)and select 1mV/div or 2mV/div; ±(4%×reading + 0.1div + 1mV)and select 5mV/div; ±(3%×reading + 0.1div +1mV)and select 10mV/div~20V/div.



		Vertical displacement ≠ 0, and N≥16: ±[3%×( reading + Vertical displacement reading)+(1%×Vertical displacement reading )]+0.2div)

		set from 5mV/div to 200mV/div + 2mV; setting value from 200mV/div to 20V/div + 50mV.
Voltage difference (ΔV) measurement accuracy (average acquisition method)		Under the same setting and condition, take the averege value for ≥16 capture waveform,
		voltage difference between any two point of the waveform(ΔV):±(3% × Reading + 0.05div )
Trigger
Trigger Sensitive		1div
Trigger level range	Internal	±5 divisions from screen center
	EXT	±3V
Trigger level average(typical)accuracy aims to the signal up and dowm times≥20ns	Internal	±(0.3div×V/div)(±4 divisions from screen center)
	EXT	±(6% set value +40mV)
Trigger ability		Nomal/Scan Mode,Pre/Delay Trigger,pre-trigger depth adjustable
Release range		100ns~1.5s
Set the level to 50% (typical)		Operate when Input singnal frequency≥50Hz
Edge Type		Rise, fall, rise and fall
Trigger Mode		(>, < , =) +Bandwith,(>, < , =) -Bandwith
Trigger Level		20ns-10s
CH1 Trigger		Edge, bandwidth
CH2 Trigger		Edge, bandwidth
Measurement
Cursor	Manual	△V, and △T between cursors, 1/ΔT(Hz)
	Track	Voltage value and time value of the waveform point
	Auto	Allow cursor appear when auto measure
Auto Measure		Vpp, Amplitude, Vmax, Vmin, Vtop, Vbase, Vmed, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay A→B , Delay A→B ,
Waveform Math		+, -, ×, ÷, invert
Storage		20 waveform,20 kinds of setting,BMP
FFT	Window	Hanning,Hamming,Biackman-Harris,Rectangular
	Sample point	1024 points
Lissajous Figure	Bandwidth	100MHz
	Phase Difference	±3 degrees
Output Voltage(Typical)		about 3V,Peak-to-peak≥1MΩ load
Frequency (Typical)		1kHz
Display
Display		7inch TFT , 800×480 pixels RGB
Waveform and grid		adjustable light for waveform and grid
Language		Chinese Simplified, Chinese Traditional, English, Portuguese, Spanish, French, Dutch, German, Russian
Other
Waveform Record		1000 screen,Can be temporarily stored or stored to a USB flash drive
Frequencycouter		6-bit hardware frequencycouter
Screen Copy		one key copy screen function
Frequency (Typical)		1kHz
Standard Configuration		USB-OTG:for digital storage and communicate with a PC
Plug Type		EU / UK / US (Optional)
Power Supply		220V (EU/UK plug), 110V (US plug), 50/60Hz
Power Consumption		< 50W
Fuse		2A, T class, 250V
Temperature		Working Temperature :10℃~+40℃; Storage Temperature:-20℃~+60℃
Humidify		<35℃:90%RH,+35℃~+40℃:≤60%RH
Altitude		Working altitude 2,000M; storage altitude15,000M
Item Size		350 * 145 * 115mm / 13.8 * 5.7 * 4.5in
Net Weight		1793g / 63.2oz
Pacakge Weight		2644g / 93.3oz

UTD2102E UNI-T

Views: 2704
Uni-T
Product: Digital Oscilloscope 100MHz
Availability: SOLD OUT

Rs 33,500

+ Rs 500 Shipping charges:

Qty

Add to Wish List Compare this Product

Tags: utd2102e, uni-t, oscilloscopes digital, 100mhz desktop

UTD2102E UNI-T

UTD2102E UNI-T Ask Question

UTD2102E UNI-T