ZF ZHONGFENG

Voltage device to stand electrolytic voltage 0-600v, current: 2-100ma, charged and recharged
Overview
Electrolytic capacitance tester instructions:

Technical parameters:

Input voltage: ac 220v

Test voltage: 200v 600v

Test current: 2, 5, 50, 100ma

Instructions:

1. Turn on the power switch and put k3 in the discharge position.

2. If the standing voltage of the capacitor to be tested is within 200v, place k2 in the 200V range, if it is greater than 200V, place k2 in the 600V range, and place k1 in the appropriate test current range.

3. Insert the capacitor under test into the Cx socket. The positive and negative dice correspond to + and - of CX.

4. Turn on switch k3 to the pressure measurement position, read the position voltage value after the displayed value stabilizes, then turn k3 to the discharge position, and then remove the capacitor.

5. Note that the capacitor should be discharged before testing. If the high-voltage capacitance exceeds 4700 microfarads, please do not directly discharge it on the machine to avoid damage to the machine.

1: chip capacitors or ceramic capacitors
2: The current setting mainly determines the test speed. The larger the capacity, the higher the current.