Your shopping cart is empty!
Features:
Insulation/Continuity Tester possesses the following features:
1. Measurement of insulation resistance
2. AC measurement
3. DC measurement
4. Small resistance measurement
5. Live detection of tested resistance
6. Short circuit protection of measured resistance
7. AC and DC automatic identification
8. Measurement data is locked.
9. Polarization Index
10. Absorption ratio test
11. Automatic discharge
12. Low battery reminder
13. Large LCD screen digital display
14. External DC power supply DC9V 1.5A
15.10M internal resistance measurement
16. Over-limit alarm
17. Auto range
18. Red alarm light, buzzer alarm.
19. High voltage alarm
20. Test voltage display
|
Technical parameters |
Technical index |
|
display |
Large-screen LCD (up to 500 counts). |
|
Over limit indication: |
Hi: The mark appears on insulation resistance range. |
|
Auto range: |
Higher range: 500 counts Lower range: 1 count (only on insulation resistance range) |
|
Sampling Rate: |
2 times / second. |
|
Allowed altitude: |
≤2000m (for indoor use) |
|
Operation environment: |
Temperature: 0℃-40 ℃ /
Humidity: ≤85% |
|
Operation environment: |
Temperature: -20 ℃ -60 ℃ /
Humidity: ≤90% |
|
Overload protection: |
Insulation resistance range: AC 1200V / 10 seconds Voltage range: AC 720V / 10 seconds |
|
Withstand voltage: |
AC 6000V (50 / 60Hz) / 5 seconds (between circuit and periphery |
|
Insulation resistance: |
≥1000MΩ/ DC 1000V (between circuit and periphery) |
|
power supply |
DC9V (6x1.5V AA batteries) |
|
Current consumption: |
Approximately 1.5A (maximum) (normally maintained at approximately 50mA) |
|
Battery Life: |
About 12 hours |
|
Dimension: |
176x110x77mm |
