HT2018B HANTEK

HT2018B\C series storage battery tester is a test equipment specialized for activated lead-acid battery.It can get storage battery working condition through testing starting process,charging process and electrical load process,then analyse life state of lead-acid battery rapidly and accurately. In addition, HT2018C is with printing function of test report.

Feature:

• Test car load state directly.
• Test car starting voltage.
• Test car charging voltage normally or not.
• Low frequency signal testing without external large load discharge test.
• Easily read out electrical capacity and physical condition to estimate lifecycle.
• Directly detect on the car without removing the battery.
• Rapidly and accurately display the result of battery test.
• Continuous operation,fully protected overvoltage and reverse connection protection.
• No electricity,no fever,no spark,no operating danger,mainly all adult can make it.
• Battery test:cold starting current,battery internal resistance and voltage,lifecycle analysis.
• Starting test:battery changing status during system starting.
• System test:output state during charging system working.
• Maximum load test:battery maximum load state.
• Application field:storage battery manufacturer,automobile production line,Auto 4S limited,storage battery distributor and owner of truck,private car.
  
  

  Function		Range	Model
  			HT2018B	HT2018C
  Cold Starting Current	CCA	100~1700	√	√
  	IEC	100~1000	√	√
  	EN	100~1700	√	√
  	DIN	100~1000	√	√
  	JIS	100~1700	√	√
  Battery Internal Resistance		0.00mΩ~99.99mΩ	√	√
  Battery Voltage		4.5V~30V	√	√
  Printing			×	√
  Test Batteries		6V、12V、24V	√	√
  Starting Load Test			√	√
  Charging Systerm Test			√	√
  Electric Load Test			√	√
  Reverse Connection Protection			√	√
  Lattice LCD Display			√	√
  Cable Length			600mm	600mm
  Dimension			143×77×28（mm）
  Weight			270g