KEW MATE 2001A KYORITSU JAPAN

Capable of measuring AC and DC currents with OPEN CLAMP SENSOR 100A

• Capable of measuring AC and DC currents with OPEN CLAMP SENSOR 100A

• Cable strength increased with robust cable protection

• Test probe can be fixed to the holster

• Can measure AC/DC current and voltage

• Pocket size and heavy duty design

• Test lead cap to protect from short circuit accident

• The open jaws are thin, perfect to clamp wires even in tight spaces
  
  
  

DC V	340.0mV/3.400/34.00/340.0/600V (Input Impedance: Approx. 10MΩ) ±1.5%rdg±4dgt
AC V	3.400/34.00/340.0/600V (Input Impedance: Approx. 10MΩ) ±1.5%rdg±5dgt [50 to 400Hz]
DC A	100.0A ±2%rdg±5dgt
AC A	100.0A ±2%rdg±5dgt (50/60Hz)
Ω	340.0Ω/3.400/34.00/340.0kΩ/3.400/34.00MΩ ±1%rdg±3dgt (0 to 340kΩ) ±5%rdg±5dgt (3.4MΩ) ±15%rdg±5dgt (34MΩ)
Continuity buzzer	Buzzer sounds below 30±10Ω (Continuity buzzer works on 340Ω range only)
Frequency	(AC A) 3.400/10.00kHz ±0.1%rdg±1dgt (AC V) 3.400/34.00/300.0kHz ±0.1%rdg±1dgt (Input sensitivity Current: more than 25A, Voltage: more than 30V)
Conductor size	Ø10mm max.
Applicable standards	IEC 61010-1 CAT III 300V / CAT II 600V Pollution degree 2 IEC 61010-031, IEC 61010-2-032, IEC 61326-1, EN 50581(RoHS)
Power source	R03 (AAA)(1.5V) × 2 * Continuous measuring time: Approx. 45 hours (Auto power save: Approx. 10 minutes)
Dimension	128(L) × 92(W) × 27(D)mm
Weight	Approx. 220g (including batteries)
Accessories	R03 (AAA) × 2 Instruction Manual
Optional accessories	9107 (Soft case)