KEW5515 KYORITSU
- Stock: In Stock
- Model: Infrared Thermometer -32 - 535ºC
Safety with non-contact temperature measurements
- Single
laser allows more accurate measurements
- Backlight
display helps to read in a dark place
- Dual
display: Main display shows the measured values and Sub display shows
either of max, min, average or thermocouple value
- Alarm
function: The upper and lower temperature limits can be set
- The
red blinking Backlight indicates that the measured value is below or over
the pre-set limits
This tester can
measure human skin (surface) temperature
but isn’t suitable for body temperature measurement.
Specification
Infrared
Thermometer | ||||||||
Measuring
range | -32 to 535ºC | |||||||
Accuracy | ±3.0ºC (-32 to -20 ºC), ±2.0ºC (-20 to +100ºC), ±2%rdg
(100 to 535ºC) | |||||||
Measuring
element | Thermopile | |||||||
Infrared
spectral band | 5 to 14μm | |||||||
Measuring
diameter | 1000mm/ ø78mm (Distance/ Measuring dia.: 12:1) | |||||||
Repeatability | Within ±1ºC | |||||||
Emissivity | Variable between 0.10 and 1.00 (by 0.01 steps), Before
shipment: 0.95 | |||||||
Collimation | Laser beam (Class 2, 630 to 670nm, 1mW or less) specifies
the center. | |||||||
Thermocouple | ||||||||
Thermocouple | K-type* | |||||||
Measuring
range of | -199 to 1372ºC | |||||||
Accuracy
of | ±1.5%rdg+1ºC (-40 to 1372ºC) | |||||||
Response | 500ms | |||||||
Resolution | 0.1ºC | |||||||
Auto
power off | If no key is pressed for 6 seconds, the power is shut off
automatically. | |||||||
LCD
display | LCD with backlight (blinks in red when alarm function is
activated) | |||||||
Dual
display | Simultaneous display | |||||||
Operating
temperature & humidity | 0 to 50ºC/ 10 to 90% RH | |||||||
Applicable
standards | IEC 61326, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-8,
IEC60825-1 | |||||||
Battery | 6F22(9V) × 1 | |||||||
Dimension | 180 (L)×130 (W)×40 (D) mm | |||||||
Weight | Approx. 195g (excluding battery) | |||||||
Accessories | 9152(Carrying
case) | |||||||
-250x250.jpg "KEW3132A KYORITSU")
