2D72 HANTEK
2D72 HANTEK
- Stock: In Stock
- Model: 70 MHz Handheld Oscilloscope with Digital Multimeter
50,000
Hantek 2D72 3-in-1 70 MHz Oscilloscope, Waveform Generator & Digital Multimeter
Features:
- 2 Channel Handheld Oscilloscope + Digital multimeter + arbitrary waveform generator
- Oscilloscope: 70MHz Bandwidth with 2 Channels
- Digital Multimeter: AC/DC voltage, AC/DC current, resistance, break, capacitance, and diode function
- Arbitrary Waveform Generator: 0~10MHz Output, Sine, Square, Ramp, Pulse, Noise, etc
- 320*240 TFT Display, 5200mAh Lithium Battery, Over 24 Hours Cruising Ability
- Auto-scale function
- Ships with 2 Oscilloscope probes and 2 BNC to 2 alligator clip test lead sets
The HANTEK 2D72 is an all-new 70 MHz handheld oscilloscope from Hantek featuring a compact and lightweight design with a new generation of 3-in-1 multifunction tester that offers an oscilloscope, arbitrary waveform generator, and digital multimeter. It has a small form factor that is easy to hold in one hand and it has a stand that was designed to support multi-angle viewing adjustment. Ultra-low-power design with a Type C charging interface affords a full day or standby two months 2 hours of battery charge allow working one full day of us or a standby time of two months. The handheld digital oscilloscope also has a High-definition color LCD screen with a nice clear display with a simple easy-to-operate Minimalist keyboard design.
 | Great Functions with a small size!
|
 | 3-IN-1Dual Channel Oscilloscope + Waveform Generator = Multimeter OSCILLOSCOPE
|
 | WAVEFORM GENERATOR
|
 | MULTIMETERMulti-functional multimeter that can be used to measure:
High sensitivity and accuracy, clear display, strong overload ability, and ultra portable. |
 | INTELLIGENT CHARGING CONTROLCan be recharged by either high-current 5V/2A or via standard computer USB interface. Unit can be charged while in use. |
 | BUILT-IN LARGE CAPACITY LITHIUM BATTERY18650 replaceable lithium battery power system. 5V/2A CHARGER |
 | Multi position support stand allows for convenient viewing angle. |
FUNCTION REVIEW
| |
CONNECTIONS REVIEW
| |
INTERFACE REVIEW
| |
Powerful PC SoftwarePowerful oscilloscope functions: 20 kinds of automatic measurement, curcor measurement, waveform printing and saving functions, REF and Math functions, Pass / Fail functions.
| |
The waveform generator is able to draw and output arbitrary waveforms on its PC software  | |
Its multimeter with recorder function, which support the measurement resultsto nerate the curves and analyze them.
| |
| Specifications | ||||
| Aquisition | Channel | OSC+ DMM + AFG | ||
| Bandwidth | 70MHz | |||
| Sample Rate | 250MSa/s | |||
| Mode | Normal, Peak Detect, | |||
| Average | N acquisitions, all channels simultaneously, N is selectable from 1-128 | |||
| Input | Input Coupling | DC, AC, GND | ||
| Input Impedance | Resistance: 1MΩ; Capacitance: 25pF | |||
| Probe Attenuation Factors | 1X, 10X, 100X, 1000X | |||
| Maximum Input Voltage | 200Vpk (DC + peak) | |||
| Horizontal | Scanning Speed Range(Sec/Div) | 5ns/div ~ 500S/div (1-2-5 sequences) | ||
| Delay Time Accuracy | ±50ppm (any interval ≥1ms) | |||
| Wave form Interpolation | Step, Linear, Sin(x)/x | |||
| Memory Depth(Sample Points) | 6k | |||
| Vertical | A/D converter | 8 bit resolution | ||
| Vertical Scale(Volt/div) Range | 10mV ~ 10V/div @ x1 probe | |||
| 100mV ~ 100V/div @ x10 probe | ||||
| 1V ~ 1000V/div @ x100 probe | ||||
| 10V ~ 10KV/div @ x1000 probe | ||||
| Position Range | ±4division | |||
| Selectable Analog Bandwidth Limit(typical) | 20MHz | |||
| Lower Frequency Response(-3dB) | ≤ 10Hz (at input BNC) | |||
| Rise Time at BNC(typical) | ≤7ns | |||
| DC Gain Accuracy | ±3% | |||
| Trigger | Trigger Source | CH1, CH2 | ||
| Trigger Mode | Auto, Normal and Single | |||
| Trigger Type | Edge trigger, Alternate trigger | |||
| Trigger Sensitivity | 0.02 div increments | |||
| Trigger Level Range | ±4V | |||
| Input | Input Coupling | DC, AC or GND | ||
| Input Impedance, DC coupled | 1MΩ ±2% for 20pF ± 3 pF | |||
| Probe Attenuation | 1X, 10X | |||
| Max. Input Voltage | CAT I and CAT II: Installation type: 300VRMS(10×) | |||
Signal Source Mode | Waveform Impedance | DC~10MHz | ||
| DAC Clock | 2K~100MHz adjustable | |||
| Frequency Resolution | 0.1% | |||
| Channel Count | 1CH Waveform Output | |||
| Waveform Depth | 4KSa | |||
| Waveform Range | ±3.5V Max. | |||
| Meter Mode | Maximum Resolution | 4,000 Counts | ||
| DMM Testing Modes | Voltage, Current, Resistance, Capacitance, Diode & Continuity | |||
| Maximum Input Voltage | AC: 400V, DC: 400V | |||
| Maximum Input Current | AC: 10A, DC: 10A | |||
| Input Impedance | 40 MΩ | |||
| Measurement | Range | Accuracy | Resolution | |
| DC Voltage | 400.00mV | ± (0.8% + 5) | 100uV | |
| 4.000V | 1mV | |||
| 40.00V | 10mV | |||
| 400.0V | 100mV | |||
| 600.0V | ± (1% + 2) | 1V | ||
| Overload protection: 400mV: 250V, other: 600Vrms. | ||||
| AC Voltage | 4.000V | ± (1.2% + 5) | 1mV | |
| 40.00V | 10mV | |||
| 400.0V | 100mV | |||
| 600.0V | ± (1% + 2) | 1V | ||
| Frequency: 40Hz~400Hz; | ||||
| Frequency of 400V and 600V: 40Hz~100Hz | ||||
| DC Current | 40.00mA | ± (1% + 2) | 10uA | |
| 200.0mA | ± (1.5% + 2) | 100uA | ||
| 4.000A | ± (1.8% + 2) | 1mA | ||
| 10.00A | ± (3% + 2) | 10mA | ||
| Overload protection: | ||||
| self restoring fuse: 200mA/250V, 4A and 10A range no fuse. | ||||
| AC Current | 40.00mA | ± (1.3% + 2) | 10uA | |
| 400.0mA | ± (1.8% + 2) | 100uA | ||
| 4.000A | ± (2% + 3) | 1mA | ||
| 10.00A | ± (3% + 5) | 10mA | ||
| Frequency: 40Hz~400Hz | ||||
| self restoring fuse: 200mA/250V, 4A and 10A range no fuse. | ||||
| Resistance | 400.0Ω | ±(1% + 3) | 0.1Ω | |
| 4.000KΩ | ±(1.2% + 5) | 1Ω | ||
| 60.00KΩ | 10Ω | |||
| 400.0KΩ | 100Ω | |||
| 4.000MΩ | 1KΩ | |||
| 40.00MΩ | ± (1.5%±3) | 10KΩ | ||
| Overload protection: 220Vrms | ||||
| Capacitance | 40.00nF | ±(3% + 5) | 10pF | |
| 400.0nF | 100pF | |||
| 4.000uF | 1nF | |||
| 40.00uF | 10nF | |||
| 100.0uF | 100nF | |||
| Overload protection: 220Vrms | ||||
| Diode | 0V~2.0V | |||
| On-Off | <50Ω | |||
General Features | Display | 320*240 TFT LCD | ||
| Interface | USB Device | |||
| Voltage | DC Input: 5V, 5200mAh Lithium Battery | |||
| Size | 7.83" x 3.86" 1.61" / 199 X 98 X 41 (mm) | |||
| Weight | 10.85 oz / 0.3kg | |||
| Included accessories | 2 oscilloscope probes | |||
