ET829 TOOLTOP

FEATURES:

-3in1 function , 80mhz digital storage oscilloscope (dso) + 6000 count large capacitance rms multimeter (dmm) + 1hz ~ 5mhz signal generator

- Oscilloscope has a real-time sampling rate of 250msa/s, analog bandwidth 80mhz and 2 channels
- fast intuitive step operation, key function and measurement mode, user-friendly interface and simple operation

- Automatic means , Dso includes automatic measurements of one key, automatic display of measurement waveform and automatic zero correction

- Storage, up to 200 S waveform doso and 2000 Dmm values ​​stored/read, and 2000 sets of data are automatically recorded for online identification

- Signal generator , produce sine wave, triangle wave, square wave signal, frequency, amplitude can be set independently. Working with an oscilloscope function at the same time, constitutes a test system

-2.8 TFT color screen, resolution 320x240 with adjustable backlight

-Built-in 2*18650 rechargeable batteries, support 15w fast charging, 10 hours use time

- Computer software , to realize timing measurement, curve drawing, waveform analysis and zero shift

- Wave preview window , to see the overall waveform of the measured waveform

- Accurate measurement, using panel calibration technology, memory of all calibration data, without potentiometer adjustment
- Multifunctional design: 3 modesf automatic, normal and single, relative value, data holding, afterglow selection, self-calibration function, cursor function, etc.

Wide applications: suitable for electrical events such as car maintenance and maintenance.

SPECIFICATIONS:
Name: 3in1 endoscope
Material: abs
General features:
Display resolution: 320 (horizontal) * 240 (vertical) pixels
Display size: 2.8 inch tft color screen diagonal
Illumination time Backlight: adjustable
Display backlight brightness: adjustable
Power supply: AC100V-240V, 50hz/60hz; dc15w fast charging
Power consumption of the whole machine: oscilloscope rnge≤ 400ma, multimeter range 200ma
battery: 18650 lithium battery 2000mah x 2 (included)
battery level indicator: yes
automatic sleep: the time can be adjusted or turned off, and there will be a quick sound or display before the sleep
Sound speed: on/off optional; There are different types of voice prompts, such as button sound, high pressure or over range during measurement, and some island voices that can be added, etc. To mute the sound, you can choose to mute the entire machine, or simply mute a selected quick sound.
Use time: about 10 hours for oscilloscope range, about 20 hours for multimeter ranges
Operating environment: 0 ~ 40 ℃, <75% rh
Storage conditions: -10 ℃ ~ 60 ℃, <90% rh
Item size: 100 *210*40mm/3.94*8.27*1.57in
Item Weight: 480g/1.06lb
Size Package: 237*185*55mm/9.33*7.28*2.17in
Package weight: 830g/1.83lb

OSCILLOSCOPE:
Number of channels: ch1 channel, ch2 channel
Bandwidth: 80mhz (single channel), 50mhz (dual channel)
rate Maximum sampling in real time: 250msa/s (single channel), 125msa/s (dual channel)
wave interpolation: (sin x) /x
peak length: when single channel, the maximum is 6k; When dual channel, the maximum is 3k
Horizontal scaling range: 5ns/divindopinDV, 1>2,5 steps
AD converter: 8-bit resolution, simultaneous sampling of each channel
Vertical scaling range: 1 x: 10mv/div-10V/div ; 10x: 100mv/div-100V/div
Vertical measurement range: ± 4 gri d
Optional bandwidth limit: 20mhz
Low frequency response (-3db): ≤ 10hz at bnc
Vertical gain accuracy: ± 3% in "average" or "average" acquisition mode "
Input resistance: 1m Ω/15
Input coupling: dc, ac, gnd
Test: 1x, 10x
Support Guide Factor: 1x, 10x, 100x
Input Protection Voltage: 300vpp
Trigger Type: Single Trigger
Trigger Mode: Auto, Single, Normal
Trigger Level: ± 4div
Slope Enabled Slope: Rising Edges, Falling Edges, Rising Edges or Falling edges
Voltage parameter measurement: peak-to-peak, rms, average, peak, Maximum, minimum
time parameter measurement: frequency, point, duty cycle, positive pulse width, negative pulse width
marker: voltage difference between nodes, time difference between coils. One intelligent cursor group, the capture point keeps track of the current waveform when the cursor moves, and the current cursor position, voltage difference and time difference information are displayed below.
FFT spectral analysis: Yes
Storage capacity: 2000 sets of data, 200 sets of weform records, with storage file manager
Filter: High card, low pass
Math operation: fft
option address: Yes (appetizotic effect is required to create lysagetic graphics) after choosing luminosity is divided into an optional multiple.
Real time communication:
zoom wave usb communication : Yes
preview of Gal Island: A small window has been added above the main interface to display the thumbnail of the waveform for preview, with an indicator to indicate that the current main interface is at a certain position in the entire collected waveform.

MULTIMETER:
dc voltage: 600.0mv-1000v, 0.75% rdg + 10dgt
ac voltage: 600.0mv-750v (trms, frequency range: 40hz-1khz), 1.0% rdg + 10dgt;
Dc current: 60. 00ma/500.0ma, 6.000a/10.00a
overload: fuse type fuse 500ma/250v, 10a/250v, 1.2% rdg + 10dgt;
AC current: 60. 00ma/500.0ma, 6.000a/10.00a (trms) overload protections: fuse type 500ma/250v, 10a/250v, 1.5% rdg + 10dgt;
resistance: 600.0Ω-60.00m, 1.0% rdg + 5dgt;
Capacitance: 10.00nf-1.000mf, 2.0% rdg + 10dgt; 000mf-100.0mf, 5.0% rdg + 10dgt;
frequency: 10.00hz-10.00mhz, 1.0% rdg + 5dgt
diode test: Open circuit voltage is about 3v, the maximum test current is about2ma
On-off test: ≤ 50Ω beep, ≥ 600Ω display 0l

Waveform Generator:
wave frequency:
Sine waves: 1hz-5mhz
square waves: 1hz-500khz
triple waves: 1hz-500khz
Amplitude: Fixed point output, max 5vpp (50Ω)-- 0vp, 0.1vpp, 0.2vpp, 0.5vpp, 1vpp, 2vpp, 3vpp, 5vp
Frequency resolution: 0.2hz
Number of channels: 1
vertical resolution: 8-
bit output impact: 50Ω
square wave precision pulse width: ± 20ns

PACKING LIST:
1 * ET829
1 * Dual Inkjet
1 * Probe scope
1 * Output clip wire
1 * Type-usb cable
1 * User manual
1 * Cloth bag