SDS1104X-C Siglent
Details
The Siglent SDS1104X-C is the new 4 channel version
of the very popular 1202X-E. This scope offers a very good price for a lot
of quality. Due to the special signal processing hardware used in this
device, the device can measure very responsive and fast. With the high
waveformcapturerate, every peak in the signal can be seen. The scope has 2
ADCs so that without loss of sample rate with 2 channels can be
measured. Even with 4 channels active, the scope still has 500MS / s
available per channel.
The scope uses Super Phosphor technology that
provides exceptional signal reproduction and results in very low noise. As
a result, the minimum voltage per division is only 500μV. Also part of
this technology is a new way of triggering that goes on regardless of what the
CPU and the screen are doing at the moment. In this way, irregularities in
the signal can be detected more easily, where conventional scopes may not
detect them.
Quite unique is that the SDS1104X-C comes standard
with decoding possibilities for serial signals. I2C, SPI, UART, RS232, CAN
and LIN can be decoded from the box. This makes the scope even more widely
applicable.
Options
Optionally this scope can be extended with a 25 MHz
function generator. This extension can be added to the scope later on
because they are linked to the device via USB. With these extensions
almost everything can be done with the scopes.
The scope can be connected to the internet via a
network cable or optional wifi dongle. Via this connection the scope can
be controlled via a web page in a browser. The scope can also be
controlled via SCPI commands.
Specifications
Bandwidth |
100 MHz |
Channels |
4 |
Memory |
14 Mpts / channel |
Vertical scale |
500 μV / div - 10 V / div |
Horizontal scale |
1 ns / div - 100 s / div |
Probe attenuation |
0.1X, 0.2X, 0.5X, 1X, 2X, 5X, 10X ...... 1.000X,
2.000X, 5.000X, 10000X |
Waveform capture rate |
100,000 wfm / s (normal), 400,000 wfm / s
(sequence mode) |
Trigger types |
Edge, Slope, Pulse Width, Window, Runt, Interval,
Dropout, Pattern, Video |
Connectivity |
USB Host, USB Device, LAN, Pass / Fail, Trigger
Out, Sbus (Siglent MSO), WiFi via dongle |
Decoding options |
IIC, SPI, UART / RS232, CAN, LIN |
Display |
7 "TFT LCD (800x400) |
Dimensions |
325 x 176 x 295 mm |
Weight |
2.5 Kg (3.5 Kg with box) |