Search
Search Criteria
Products meeting the search criteria
Model: Servo Motor SG-90 for Arduino
Servo Motor Wire ConfigurationWire NumberWire ColourDescription1BrownGround wire connected to the ground of system2RedPowers the motor typically +5V is used3OrangePWM signal is given in through this wire to drive the motor TowerPro SG-90 FeaturesOperating Voltage is +5V typicallyTorque: 2...
280
Model: Sparkfun USA
Description: This is your basic spool of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder...
2,500
Model: Sparkfun USA
Description: This is your basic tube of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 15 grams (around 5ft). Easy to solder with - recommended for beginners...
800
Model: Sparkfun USA
Description: Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it’s easy to inter..
3,000
Model: Sparkfun USA
Description: The BlueSMiRF Silver is the latest Bluetooth wireless serial cable replacement from SparkFun Electronics! This version of the popular BlueSMiRF uses the RN-42 module which has a bit less range than the RN-41 module used in the BlueSMiRF Gold. These modems work as a serial (RX/TX) p..
5,000
Model: Sparkfun USA
Description: If you’ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works..
1,000
Model: Sparkfun USA
Description: Running out of memory space in your Arduino project? The SparkFun microSD Shield equips your Arduino with mass-storage capability, so you can use it for data-logging or other related projects.Communication with microSD cards is achieved over an SPI interface. The SCK, DI, and DO pi..
3,000
Out Of Stock
Model: Sparkfun USA
Description: Everyone knows and loves Raspberry
Pi, but what if you didn’t need additional peripherals to make it wireless. The
Raspberry Pi 3 is here to provide you with the same Pi as before but now with
double the ram and a much faster processor. The credit-card sized computer is
capable..
5,500
-250x250.jpg "SparkFun XBee Explorer Regulated")
Model: Sparkfun USA
Description: The SparkFun XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V serial signals to 3.3V so that you can connect a 5V (down to 3.3V) system to any XBee module. Th..
2,500
Model: Sparkfun USA
Description: This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the seri..
4,500
Out Of Stock
Model: Solder Leaded - 100-gram Spool
This is your basic spool of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder...
3,000
Out Of Stock
Model: Solder Lead Free - 100-gram Spool
This is your basic spool of lead free solder with a water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder.If you are just beginning to solder, we recommend you order the leaded solder. Lead-fr..
