KPS2005D WANPTEK

KPS series is a high power digital display programmable switching DC voltage regulator. It is a DC-type programmable power supply with attractive appearance, small size, high performance, powerful function and easy operation. It is suitable for testing in the aerospace and defense, consumer electronics, computer and peripheral, communications, semiconductor, solar and automotive electronics industries. It can display voltage, current and power at the same time. Its output voltage and output current are adjusted by "encoder knob", which can be continuously adjusted from 0 to nominal value, and it has the significant advantages of high power, high current, fast response, rapid load transient response, low noise and easy to use! The stability and ripple coefficient of the power supply are very good, with short-circuit protection, over-voltage protection, over-current protection, over-temperature protection and other protection circuits, can work for a long time at full load, and is favored by the majority of users.Pushbuttons to Control Output (Output) The KPS6020D DC power supply has a separate pushbutton for controlling the output. Voltage and current have been upgraded to knob settings, allowing the user to preset parameters and display them on the screen without connecting a load.OCP short-circuit protection switchUsed to switch whether the OCP function is activated or not.1:If OCP is not activated: If the actual output current is greater than the set current value, the power supply unit switches to constant current mode and changes the output voltage according to the load to keep the output current constant.2:If OCP is activated: If the power supply unit switches to constant current mode, the power supply unit switches off the output and issues a warning. Pressing the OCP button again will cancel the warning state until the short circuit or constant current state is canceled. This prevents the output current from becoming too high

Product information