Main Menu / Categories
Your Cart

Fluke i30

Fluke i30 AC/DC Current Clamp
Pre-Order
Fluke i30
  • Stock: Pre-Order
  • Model: AC/DC Current Clamp
116,000
No Shipping Charges

The i30 current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments.


Specifications: Fluke i30 AC/DC Current Clamp

Electrical Specifications
Specified current range30 mA to 30 A DC, 30 mA to 20 A AC rms
Usable current range5 mA to 30 A DC, 30 mA to 20 A AC rms
Crest Factor1.4 in
Output sensitivity100 mV/A
Accuracy (at +25°C)±1% of reading ±2 mA
Resolution±1 mA
Load impedance> 10 k Ohms and ≤ 100pF
Conductor position sensitivity±1% relative to center reading
Frequency rangeDC to 20 kHz (-0.5 dB)
Temperature coefficient±0.01% of reading/°C
Power supply9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator
Working voltage (see Safety Standards section)300 V AC rms or DC
General Specifications
Maximum conductor size19 mm diameter
Output connection4 mm safety connector
Output zeroManual adjust via thumbwheel
Cable length1.5 meters
Operating temperature range0°C to +50°C
Storage temperature range (with battery removed)-20°C to +85°C
Operating humidity15% to 85% (non-condensing)
Weight250 g
SafetyIEC 61010-1, Pollution Degree 2
IEC 61010-2- 032: CAT III 300V
Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc andfrequencies below 1 kHz.
EMC CompatibilityIEC 61326-1: Portable Electromagnetic Environment