Main Menu / Categories
Your Cart

FLUKE 435-II

FLUKE 435-II
  • Stock: Pre-Order
  • Model: Three-Phase Power Quality and Energy Analyzer
1,900,000
No Shipping Charges
Features
  • Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars (other local currencies available)
  • Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp
  • PowerWave data capture: Captures fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.)
  • Waveform capture: Captures 50/60 cycles (50/60Hz) of each event that is detected in all modes, without set-up
  • Automatic Transient Mode: Captures 200 kHz waveform data on all phases simultaneously up to 6 kV
  • Fully Class-A compliant: Conducts tests according to the stringent international IEC 61000-4-30 Class-A standard
  • Mains signaling: Measures interference from ripple control signals at specific frequencies
  • Troubleshoot: Analyze the trends using the cursors and zoom tools
  • Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance
  • Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex designed to fit into the tightest places
  • Automatic Trending: Every measurement is always automatically recorded, without any set-up
  • System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard
  • Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals
  • View graphs and generate reports: With included analysis software
  • Battery life: Up to 8 hours operating time per charge on Li-ion battery pack
  • Wireless data download: Download data to PC wirelessly and capture screens using Fluke Connect App
  • Measure multiple parameters simultaneously to quickly understand overall power quality health
  • View data as simple digital values or more detailed trend graphs that give you fast insight into changes over time, waveforms, and phasor diagrams
  • Organize data in tabular format so you can quickly correlate parameters like magnitude, duration, and time to the issues you are experiencing in your facilit


Fluke 435-II Specifications

Volt
Vrms (AC + DC)Measurement range: 1 to 1000 V phase to neutral
Resolution: 0.01 V
Accuracy: ±0.1% of nominal voltage1
VpkMeasurement range: 1 to 1400 Vpk
Resolution: 1 V
Accuracy: 5% of nominal voltage
Voltage Crest Factor (CF)Measurement range: 1.0 > 2.8
Resolution 0.01
Accuracy: ±5%
Vrms 1/2Resolution: 0.1 V
Accuracy: ±0.2% of nominal voltage
Amps
i430-Flex 1xMeasurement range: 5 to 6000 A
Resolution: 1 A
Accuracy: ±0.5% ±5 counts
i430-Flex 10xMeasurement range: 0.5 to 600 A
Resolution: 0.1 A
Accuracy: ±0.5% ±5 counts
1mV/A 1xMeasurement range: 5 to 2000 A
Resolution: 1 A
Accuracy: ±0.5% ±5 counts
1mV/A 10xMeasurement range: 0.5 to 200 A (AC only)
Resolution: 0.1 A
Accuracy: ±0.5% ±5 counts
i430-FlexMeasurement range: 8400 Apk
Resolution: 1 Arms
Accuracy: ±5%
1mV/AMeasurement range: 5500 Apk
Resolution: 1 Arms
Accuracy: ±5%