Search
Search Criteria
Products meeting the search criteria
Pre-Order
Model: Small vane anemometer
DetailsProduct DescriptionThe testo 416 is an easy to use small vane anemometer with an attached vane probe on a telescoping handle to measure CFM in air ducts. This handheld digital vane anemometer allows you to switch between volume flow and velocity readings quickly.Timed average eases and quicke..
Out Of Stock
Model: Engine Oil Tester
Product DescriptionThe tester primarily reacts to the increase in acidity of oil. As the oil degrades, it becomes more acidic and will begin to pit metal engine partsThe red LED #10 reading usually means that the level of acid in the oilhas reached a maximum acceptable level, and the oil should be c..
6,500
Model: BNC to Alligator Cable
Type
Technician
Connector Grade
General Purpose
Impedance
50 Ω
Temperature
0°C to +80 °C
RoHS (2011/65/EU)
Compliant..
500
Model: Sparkfun USA
Description: This is a breakout board for the fully integrated Hall Effect based linear ACS712 current sensor. The sensor gives precise current measurement for both AC and DC signals. Thick copper conductor and signal traces allows for survival of the device up to 5 times overcurrent conditions..
2,500
Pre-Order
Model: Textile Hardness Tester Ball 2.5mmΦ
To measure the winding density (hardness) of textile
bobbins, beams, spools, cones, dye packages etc.
* Convertible probe, the curved end of the probe is used
for the bobbin with a diameter less than or equal to
400mm, and the flat end of the probe is suitable for the
bobbin with a diameter ..
47,000
Pre-Order
Model: Textile Hardness Tester Ball 5mmΦ
To measure the winding density (hardness) of textile bobbins, beams, spools, cones, dye packages etc. * Convertible probe, the curved end of the probe is used for the bobbin with a diameter less than or equal to 400mm, and the flat end of the probe is suitable for the bobbin with a diameter greater ..
47,000
Pre-Order
Model: Digital Display Small Load Brinell Hardness Tester
Product OverviewMitech MHB-62.5 Digital Display Small Load Brinell Hardness Tester, based on the mechanical principle of hard alloy indenter pressing into the sample surface to produce indentation, realizing the material hardness measurement by measuring the diameter of the indentation. It’s MITECH ..
1,650,000
Out Of Stock
Model: Aluminum Alloy Stand For Microscope
Microscope Stand - Digital Microscope Stand - Stand For Microscope | Microscope is not included.Aluminium Alloy Stand for G600 series microscopeProduct ID: 1119592; Product ID: 1152799 and most model of others microscopes.Package Included: 1 x G600 Digital Microscope Aluminium Alloy Stand (Onl..
3,000
Model: Electronic 5-in-1 Stud Metal Finder Wall Scanner
Overview:Detects Wooden Pillar, Metal Stud, Metal Pipe and AC Voltage
Sound and LCD Dynamic Indications
Low Battery Indicator
3 Wires Circuit Socket Test
GFCI TestFeatures:Metal profiles Detection of wooden and metal profiles in
walls
detection of metal pipes
Detection of AC volta..
9,800
Pre-Order
Model: Copper Alloy Webster Hardness Tester
Product OverviewMW series aluminum Webster tester is also called clamp type hardness tester, They are divided into MW, MW-20a, MW-20b three types, they are light and portable can be hold by one hand, do not need sample when testing, without high skill requirements. It can do fast NDT test of workpie..
30,000
Pre-Order
Model: Soft Copper Alloy Webster Hardness Tester
Product OverviewMW series aluminum Webster tester is also called clamp type hardness tester, They are divided into MW, MW-20a, MW-20b three types, they are light and portable can be hold by one hand, do not need sample when testing, without high skill requirements. It can do fast NDT test of workpie..
118,000
Pre-Order
Model: All-in-one CCTV tester
All-in-one CCTV tester NF-716ADHS7 inch Retina touch screen, 1920*1200 resolution. 8MP CVI/ TVI/ AHD, 8MP EX-SDI, HD-SDI, 3G-SDI*.H.265/H.264, 4K video display via mainstream. &n..
95,000
