Main Menu / Categories
Your Cart

SRT6223 Landtek In Pakistan

Introduction:

This Digital Surface Profile Gauge is a handheld gauge for fast and accurate measurement of the peak-to-valley height of the surface profile of blast cleaned surfaces.
It meets the standards of ASTM D 4417-B,IMO MSC.215(82),SANS 5772,US Navy NSI 009-32,US Navy PPI 63101-000. Suitable for the laboratory and for use in harsh field conditions. Accurate, immediate and repeatable results.
The tungsten carbide tip will last for up to 20,000 readings and can then be easily replaced by the user in the field.
Used the exclusive Micro -computer LSI circuit and crystal time base to offer high accuracy measurement.
Widely used in field of blast cleaned surface measurement. If the profile is too large the amount of coating required to ensure adequate coverage increases, otherwise there is a danger that the peaks remain uncoated - allowing rust spots to occur. If the profile is too small, there maybe an insufficient key to produce adequate adhesion, leading to premature coating failure . Ensuring the correct surface preparation optimises the performance of the coating and material usage.

 

DisplayLCD
Range0~800 µm/29.5 mils
Accuracy±5%or±5 µm,(whichever is the greater)
Resolution0.1 µm/1 µm
0.1mils
PrincipleInductance Type
OperatingTemperature:0~50ºC
ConditionsHumidity:<80%RH
Power Supply4x1.5V AAA(UM-4)Battery
Dimensions162x65x28 mm
Weight280g
Standard AccessoriesMain Unit
Standard Sample Plate
Carrying Case ( B04 )
Operation Manual
Optinal AccessoriesRS-232C Cable with Software
Bluetooth Adapter with Software