ZJ-18 In Pakistan

Features: 
Great soldering work tool for smart phone, PCB, BGA, electronic parts repairing. 
Mild pH, no corrosiveness to IC or PCB. 
Transparent residue, no need to wash 
Melting point is slightly higher than soldering tin. 
This flux have stable performance and low volatility, recycled for a long time, no toxic and irritant smell.
Made of no acid soldering flux, semi solid which is not easy to dump.
Have strong oxide removal effect to gold-copper alloy substrate and wire.
High intensity joint, Good immersion, Non-toxic, no corrosion, Good insulation, Smooth welding surface, No deterioration, never dry
Strong welding power, joint high intensity, low residual.

Specification: 

Material:Rosin
Neutral PH 7 ±0.3 
Viscosity: 1 Pa S 
Granularity: 1um 
Type: Paste 
Weight: 10/50g 
Size: 10 g: approx. 50 X 50 X 12 mm/1.97 X 1.97 X 0.47 in 
50 g: approx. 75 X 75 X 17 mm/2.95 X 2.95 X 0.67 in 

Method of use :  

1. Using the end of a match or toothpick, apply a little soldering paste to the leads which need to be soldered.
2. Placing the soldering iron tip over the leads. Making the solder against these leads.
    Heat the solder till it flows freely, then move the soldering iron and solder away in a rapid speed.

Package list

10g/50g ZJ-18 Soldering Paste