DSO 4072C HANTEK

Name: DSO 4072C HANTEK
Brand: HANTEK
Price: 65000.00 PKR
Availability: OutOfStock

DSO 4072C HANTEK Digital Storage Oscilloscope 70MHZ

Pre-Order

Tags: dso , 4072c , hantek , pre , orders digital , storage , oscilloscope , 70mhz oscilloscopes desktop

DSO 4072C HANTEK

Stock: Pre-Order
Model: Digital Storage Oscilloscope 70MHZ

HANTEK

Based on 0 reviews. - Write a review

65,000

No Shipping Charges

Qty

Add to Cart

Ask for price

Add to Wish List Compare this Product

Description

Model	DSO4202C	DSO4102C	DSO4072C
Oscilloscope
Sample Rate	Sampling Rate Range: 1GSa/s
	Equivalent Sample Rate: 25GSa/s
Acquisition Modes
Normal	Normal data only
Peak Detect	High-frequency and randon glith capture
Average	Wavefom Average, selectable 4,8,16,32,64,128
Inputs
Inputs Coupling	AC, DC, GND
Inpits Impendance	1MΩ±2% ‖20pF±3pF
Probe Attenuation	1X, 10X
Supported Probe Attenuation Factor	1X, 10X, 100X, 1000X
Maximum Input Voltage	CAT I and CAT II: 300VRMS (10×)
	CAT III: 150VRMS(1×);
	Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur.
Horizontal
Sample Rate Range	1GS/s
Waveform Interpolation	(sin x)/x
Record Length	40K
SEC/DIV Range	2ns/div to 40s/div
Sample Rate and	±50ppm（at over any ≥1ms time interval)
Delay Time Accuracy
Position Range	2ns/div to 8ns/div; (-8div x s/div) to 20ms;	20ns/div to 80us/div; (-8div x s/div) to 40ms;
		200us/div to 40s/div; (-8div x s/div) to 400s
Delta Time Measurement Accuracy (Full Bandwidth)	Single-shot, Normal mode:± (1 sample interval +100ppm × reading + 0.6ns); >16 averages:± (1 sample interval + 100ppm × reading + 0.4ns); Sample interval = s/div ÷ 200

Vertical
Vertical Resolution	8-bit resolution, all channel sampled simultaneously
Position Range	2mV/div to 10V/div
Bandwidth	200MHz	100MHz	70MHz
Rise Time at BNC( typical)	1.8ns	3.5ns	5ns
Offset Range	2mV/div to 20mV/div, ±400mV; 50mV/div to 200mV/div, ±1V 500mV/div to 2V/div, ±40V; 5V/div to 10V/div, ±50V

Math	+, -, *, /, FFT
FFT	Windows: Hanning, Flatop, Rectamgular, Bartlett, Blackman;
	1024 sample point
Bandwidth Limit	20MHz
Low Frequency Response (-3db)	≤10Hz at BNC
DC Gain Accuracy	±3% for Normal or Average acquisition mode, 10V/div to 10mV/div;
	±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
DC Measurement Accuracy, Average Acquisition Mode	When vertical displacement is zero, and N ≥16:± (3% × reading + 0.1div + 1mV) only 10mV/div or greater is selected; When vertical displacement is not zero, and N≥16: ± [3% × (reading + vertical position) + 1% of vertical position + 0.2div]; Add 2mV for settings from 2mV/div to 200mV/div; add 50mV for settings from 200mV/div to 10V/div

DSO 4072C HANTEK

Quick Links

My Account

Customer Service