Your shopping cart is empty!
|
Tester |
High voltage detector |
Mainframe (current clamp) |
|
Range |
0.0mA～1200A（50/60Hz Auto） |
0.0mA～20A |
|
Resolution |
0.1mA |
0.1mA |
|
Jaw size |
φ50mm |
φ7.5mm |
|
Accuracy |
±2%±5dgt |
±0.5%±5dgt |
|
Sampling Rate |
2 times/second |
|
|
Function |
High-low voltage current transformer primary and
secondary loop current, transformation ratio, polarity, phase, and on-line
test; current and voltage ratio on both sides of transformer; on-line test;
load current test |
|
|
Transmission type |
Wireless transmission, linear transmission distance 30m |
|
|
Change gear |
Fully automatic shift |
|
|
Power |
DC6V 7# alkaline battery（1.5V AAA×4） |
DC7.5V 5# alkaline battery（1.5V LR6×5） |
|
Test method |
Clamp CT |
|
|
Dimensions |
W/T/H 87*37*262mm |
Host：W/T/H 100*35*204mm |
|
|
|
Current clamp：W/T/H 42*20*137mm |
|
Display mode |
LCD：128dots×64dots Blue screen backlight for dim
places |
|
|
LCD Size |
62mm×44mm |
|
|
Change ratio |
Three kinds of transformation ratio display: (The primary
and secondary circuit actually measured the current transformation ratio; the
conversion ratio of the secondary circuit 5A; 10kV-YY transformer conversion
ratio of 10kV/380V), the maximum ratio of 1:1 million |
|
|
Line voltage |
Line test with insulation sheath below 60kV or bare wire
current test below 35kV (with insulation rod operation) |
|
|
Lead length |
Current clamp lead 2 meters |
|
|
Weight |
Total instrument weight：7Kg（Insulated rod and instrument
package） |
|
|
|
High pressure detector：370g（Including battery） |
|
|
|
Host：409g（Including battery） |
|
|
|
Current clamp：180g |
|
|
Data interface |
USB transmission |
|
|
Overflow display |
Over-range overflow function: “OL A” symbol display |
|
|
Data storage |
500 groups, press MENU to keep data, HOLD symbol
display, press MENU again to cancel |
|
|
Data review |
Long press the MENU button to enter the data
reference mode, MR symbol display, press MENU again
to exit |
|
|
Data is full |
Data full function: “FULL” symbol display |
|
|
Switch display mode |
Long press the POWER button to switch between
the test display mode and the conversion ratio display mode |
|
|
No signal indication |
When the host does not receive the transmit signal, it
prompts “no signal” |
|
|
Automatic shut-down |
About 15 minutes after power on, the meter will
automatically shut down |
|
|
Battery voltage |
When the battery voltage drops to 3.5V, the low-power
indicator lights to remind you to replace the battery |
When the battery voltage drops to 5.2V, the battery voltage
is low symbol to remind to replace the battery |
|
Insulation rod |
Five section insulation rod (5 meters) |
|
|
Insulation strength |
AC 60kV/rms |
|
|
Line test |
Insulation sheath wire test below 60kV line voltage, bare
wire test below 60kV (with insulation rod operation) |
|
|
Working temperature |
-10℃～40℃ |
|
|
Storage temperature |
-10℃～60℃ |
|
|
Relative humidity |
0℃～31℃≦75%，31℃～40℃≦50% |
|
|
Suitable for safety regulations |
IEC1010-1、IEC1010-2-032、Pollution degree 2、CAT Ⅲ(600V)
IEC61326(EMC standard) |
|
