GOOT
In Stock
Model: Soldering Iron GOOT JAPAN
DetailsSmart deviceat theOriginJP (Origin)DimensionsThe descriptionModel numberPX-201Output power70WInput Voltage220-240VOutlet temperature250~450 Celsius degreeTemperature stabilityThe descriptionCertificateNONE..
16,900
Model: LEAD FREE SOLDER WIRE ROSIN CORE 0.6MM
Model: SF-B1006, Composition (Sn-Ag-Cu): 99-0.3-0.7, M.T: 216-227C, Día: 0.6mm, Length (reference): 56m, Weight: 100g, Rosin: Rosin core..
7,450
Model: Soldering Iron Tip Goot
Goot TQ-77RT-B-L soldering iron replacement tip with aluminium base and non-stick stainless sleeve.CompatibilitySoldering Iron Goot TQ-77Soldering Iron Goot TQ-95StructureSoldering iron tip has aluminium base and 0.5 mm conical shaped tip.Replacement procedureUnscrew a barrel nut.Take off a heater c..
2,300
Model: Tip Refresher 9g
1. Optimal tip temperature for cleaning is 300°C-360°C.2. Rub the tip in the tip refresher.3. Apply solder to the tip, and clean the tip with the sponge of the soldering iron stand.4. Apply solder again. You are finished. If wetting capability is not enough, repeat steps 2 & 3MODELBS-2Compositio..
2,150
-23 %
Model: Soldering Paste 10g
Buy Now BS10 Goot Japan At Best Price in Pakistan 2024 Goot BS-10 Soldering Paste Soldering grease is widely used as a soldering flux. It is divided into a neutral grease recommended for quality soldering of radio and electric devices and an active grease.Order Now: https://testi..
480 620
Model: Soldering Paste 50g
MODEL
BS-10
BS-15
NET Content
10g
50g
Composition
Vaseline : 80-90wt%
Zinc chloride : 4-6wt%
Water : 2-4wt%
Paraffin : 6-9wt%
Ammonium chloride..
2,200
Out Of Stock
Model: Solder Wick
MODELWidthLengthCP-15YApprox. 1.5mmApprox. 2mCP-20YApprox. 2.0mmCP-25YApprox. 2.5mmCP-30YApprox. 3.0mmCP-35YApprox. 3.5mm..
1,400
Model: DESOLDERING Wick 2.0mm
Our thin and soft DESOLDERING wire’s flat braid has
efficient thermal transmission. Removes solder faster with better heat response
than previous wicks. Recommended for lead-free solder with high heating load.
CP-2015
MODEL
Width
Length
CP-1015
..
550
Model: DESOLDERING WICK CP-20Y
Desoldering wick with stainless steel mouth - CP -20Y is a solder suction line. It is used for removing the solder of the printed circuit board.It is a high quality desoldering wick with braided copper wire, saturated with RMA flux.This Item Includes1* Solder wick - CP -20YSpecifications● Width: 2mm..
1,250
Hot
Model: DESOLDERING Wick 3.0mm
Our
thin and soft desoldering wire’s flat braid has efficient thermal transmission.
Removes solder faster with better heat response than previous wicks.
Recommended for lead-free solder with high heating load.
CP-3015
MODELWidthLengthCP-1015Approx. 1.0mmApprox. 1.5mCP-1515Approx. 1.5mmCP-2015Ap..
750
Model: DESOLDERING Wick 3.5mm
Our thin and soft desoldering wire’s flat braid has
efficient thermal transmission. Removes solder faster with better heat response
than previous wicks. Recommended for lead-free solder with high heating load.
CP-3515
MODEL
Width
Length
CP-1015
..
900
Model: DESOLDERING WICK
Technical DetailsBrand(goots)Model NumberCP35YPackage Dimensions13.3 x 6.5 x 1.2 cm; 27 gWallpaper PatternSingle ItemAre Batteries IncludedNoItem Weight27 gDescription-Can be used at ease for precision equipment. Comes with a stainless steel cap.-Dispense case makes it easy to hold and your fi..
1,650
