ES7060 FUZRR

Function

Live cable identification, power outage cable identification, single-core cable identification, with FHD algorithm

Power supply

8.4V/2500mAhCharable lithium battery, USB charging interface, full power continuous operation for about 6 hours

Receive frequency

6 options：640Hz、1.28KHz、2.56KHz、3.84KHz，6.50KHz，8.05KHz

Gain

4 levels

Unique identification

Yes, the target cable display（√）

Filter mode

Hardware filtering + DSP digital filtering

FHD algorithm

Support, instrument direct results, greatly reduce the use requirements of field personnel

Calibration quantity

Number of calibrated cables: 1~20

Identification condition

Current, the percentage of the received and transmitted signal between 70% and 130% of the calibration value is one of the conditions for successful identification

Signal coding, receiver decoding by the algorithm, and the transmitter output coding is one of the successful identification conditions

Signal phase, the receiver extracts the phase through the algorithm, <50 is one of the successful conditions

Current direction, the receiver judges the current signal direction, and the calibration value comparison is one of the successful identification pieces

Display mode

The 3.5-inch real color LCD screen display, color icon indication

Receiver size

172mm ×106mm ×42mm

Flexible current clamp

Internal diameter ：φ200mm  Signal line length: 3 m

Scope of detection

Power failure identification: the coil can detect the composite pulse width frequency signal with circuit resistance of 0 Ω ~ 30 kΩ; generally, the cable length can be over 20 km, mainly determined by the cable grounding resistance and cable resistance.

Live identification: the coil can detect the pulse signal with circuit resistance 0 Ω ~500 Ω; when the test circuit resistance is 500 Ω, the cable length can reach 0-10 km

capacity of resisting disturbance

Highest 100A（50Hz，10dB level）

Signal sampling rate

Adaptation for different frequency sampling rates，Max 819.2KHz

Armored damaged mode

Yes

The results show the period

About 2times/second

Auto shut off

After 30 minutes of no operation and no input, the instrument will be shut down automatically to save power

When the battery level is too low, the instrument will be shut down

Firmware update

Support, is updated via USB

USB

USB Charging port

Working temperature and humidity

-10℃～40℃；less than  80%Rh

Store temperature and humidity

-10℃~50℃，≤95％RH, no condensation

Receiver quality

Flexible current clamp 112g; Receiver 405g (with battery)

Withstand voltage

AC2000V/rms(Before the front and rear ends of the enclosure)

Function

Output composite pulse width frequency signal, signal coupling output, signal directly connected output, display output voltage, output current, circuit impedance, residual battery voltage, and dynamic indication of transmission state

Power supply

Live identification model: 9.6V / 6Ah lithium battery, full power continuous operation for about 8 hours (3 levels output)

Output method

Live identification model: automatic identification, caliper coupling during live identification; direct connection output during power identification

Power outage identification type: only power outage identification direct connection output

Frequency

6 Adjustable：640Hz、1.28KHz、2.56KHz、3.84KHz，6.50KHz，8.05KHz

Output interface

Waterproof aviation socket

Output power

Maximum 15W, 5 Levels adjustable, automatic real-time impedance matching

Output voltage

The maximum peak value is about：110V

Armored damaged mode

Yes

Transmitter clamp

inner diameter：φ125mm    wire length：3meter

Directed connection clamp

Caliber：Max 24mm wire length：1meter

Transmitter clamp  magnetically saturated

40A（50Hz）

Human-computer interaction

Physical buttons, touch screen , gesture recognition

Auto shut off

Yes, no operation, no output for 30 minutes of automatic shutdown, the time can be set

Automatic standby

Yes, the default no operation for 5 minutes to automatically reduce the screen brightness to save power, the time can be set

External voltage detection

Yes, up to 150V

Charging port

Circular charging interface, DC mark

Fixed parts update

Support, is updated via USB

Transmitter size

275mm×226mm×150mm

LCD size

Length width 120mm×70mm； Display field 110mm×62mm

Working temperature

-10℃～40℃

storage condition

-20℃~50℃，≤95％RH, no condensation

Working temperature

-10℃～40℃

Storage condition

-20℃~50℃，≤95％RH, no condensation

Instrument quality

Transmitter about 2.28kg; Transmitter clamp about 1.12kg; The direct connection test clip is about 170g, and the total mass is about 4.44kg

Withstand voltage

AC 3700V/rms(Before the top surface and bottom surface of the instrument box)

Electromagnetic characteristics

IEC61326(EMC)

Refer to safety regulations

IEC61010-1(CAT Ⅲ 300V、CAT IV 150V、class of pollution 2)